Car cushions have become a must for car owners to decorate their cars. Now many people choose to buy seat covers online, which is cheap and affordable. However, for some car owners who want to install car cushions themselves, it seems that it is still a little difficult. The following is a detailed compilation of how to install the car seat cover. I hope it can help you.
1、 Front backrest:
1. Pull out the headrest first (generally press and hold the headrest movable bolt);
2. Put the backrest cover (see the left and right, front and back sides); The difference between the left and right depends on whether the storage bag on the backrest side is in the middle. If it is near the door, it means it is installed upside down.
3. Insert the front of the backrest cover from the joint with the seat to the back of the backrest, and fix it with the adhesive tape at the bottom of the back of the backrest cover with a little force. It will be more comfortable and beautiful if it is tighter.
4. Then insert the head cover into the backrest;
5. Arrange and level the installed backrest, and the installation of the front backrest is completed.
2、 Front seat:
1. First, put the seat cover on the seat and adjust the position (the front two corners of the seat are pulled apart);
2. There are surplus parts, Velcro and rope near the backrest, which are directly inserted behind the backrest along the gap, and the ropes on both sides are pulled out to the bottom of both sides as far as possible; The rope on the side of the seat shall be tied tightly, and then the Velcro shall be threaded to the front under the seat (note that it shall not be twisted with the button thread). There are two I-shaped buckles on both sides of the front and bottom of the seat. The Velcro shall be opened to pass through the open buckles, and shall be tensioned and anti glued to the white bottom (the plush side)
3. Then, the seat covers shall be arranged and leveled, and the front seat shall be installed (the left and right installation are the same).
3、 Rear backrest installation
① . pull out the headrest first;
② . cover the backrest;
③ Insert the Velcro and rope at the bottom of the front of the backrest cover behind the copy, string the Velcro from the bottom to the back through the plastic buckle at the upper end, fold it back and stick it, and bind the rope and the rope at the side of the backrest tightly;
④ Arrange and level the installed backrest, then insert the headrest, and the installation of the rear backrest is completed.
4、 Rear seat installation
① . pull up the rear seat slightly, and the whole seat can be turned up directly, so the installation is quite simple;
② Put the seat cover on the seat and adjust the appropriate position;
③ Pull the Velcro at the front end of the seat at the back end from under the seat to the back through the plastic buckle, and then fold it back and stick it; Then tighten the rope at the rear end; Then arrange the seat cover and complete the installation of the front backrest.
